IMAGE GUIDELINES
__________________________
After you have placed your order we will send you a proof to confirm that the attached image is exactly as supplied. Once the artwork file has been approved we will begin the preparation process for engraving your image.
Your artwork should adhere to the following guidelines:
-High resolution, JPEG, PNG, Ai, EPS or PDF
- Single colour, print-ready file
- No drop shadows or gradients
-Text should be no less than 6pt
- Minimum stroke width of at least 0.5pt- Keep workable area to scale
Please make sure you eliminate as much black space as possible. Please refer to the image below.
Branding iron with a lot of Black space
Branding iron with limited amount of Blackspace
The 'white' or clear part of your logo will always be the part that will be engraved/milled away. Black represents the raised part of the branding iron which will be Leaving your mark.
*It is not necessary to flip your image. The finished stamp will look like your original artwork file.*
Incase you are unsure that your logo will work, please email us with your available file formart and we will be more than happy to take a look.
Have a drawing?
We convert drawings or poor quality image files into high resolution vector files. Anything from a simple signature or a more complex sketch. You may also wish to use this service if your image does not the requirements mentioned above. All source files will be provided to you at no charge.